Description

Based on water-emulsified linseed oil with water-repellent additives.

Preparation: The surface must be clean, dry and firm, swept with a steel brush and/or sanded. Remove loose, porous, and decayed wood.

Instructions: The surface must be clean and dry (14% moisture). Apply the wood oil with a brush. Avoid glossy patches on knots and saturated timber by wiping off with a rag or sponge. Apply the oil in several coats with intermediate drying until the surface is saturated and no longer absorbs the oil.

NOTE! Contains linseed oil. Risk of self-ignition. Used rags, cloths, etc. must be submerged in water or burned.

NOTE! Not suitable on surfaces that may come into direct contact with food.