Colourless wood oil with 35% linseed oil. For treating previously glazed or untreated timber. Protects against water penetration and drying out. For outdoor use. Highly exposed surfaces should normally be treated at least once a year. Not harmful to crops. Dryness factor 30%.

Instructions:

The surface must be clean and dry (14 % moisture). Fibres in old and greying surfaces must be sanded. Apply the wood oil with a brush. Prevent glossy patches on knots and saturated timber by using a rag moistened with aliphatic spirit/turpentine to wipe off within 15 minutes after application. Apply the oil in several coats with intermediate drying until the surface is saturated and no longer absorbs the oil.

NOTE! Not suitable for spraying.

NOTE! Contains linseed oil. Risk of self-ignition of rags, clothes, etc. Used rags, cloths, etc. must be submerged in water or burned.